Brackets now removed… Unfortunately, the trunk still isn't active, answering or acting any differently. Commenting out the proxy setting hasn't changed matters either. Thanks for answering
On 17 Jul 2013, at 15:10, Michael Keuter <[email protected]> wrote: > > Am 17.07.2013 um 15:20 schrieb Aaron Sarginson <[email protected]>: > >> Hi, >> >> I'm trying to set up a sipgate.co.uk inbound trunk in Astlinux. >> It shows as 'OK' but under SIP Peer Status and is not shown under SIP Trunk >> Registrations in the GUI. >> The 'sip show registry' command shows other trunks but not this one. >> >> All other trunks, extensions and dial plan info were entered via the >> Asterisk GUI. >> >> Could someone help me with this please? >> >> >> Here are the modifications I made for sipgate. >> >> The relevant sections of sip.conf: >> >> [general] >> context = default ;default context for incoming calls >> bindport = 5060 >> bindaddr = 0.0.0.0 >> srvlookup = yes >> disallow = all ;disallow all codecs >> allow = alaw ;except alaw (1st pref) >> allow = ulaw ;and ulaw (second pref) >> >> >> register => USERNAME: [email protected]/USERNAME >> [sipgate.co.uk] >> type = friend >> insecure = port,invite >> context = [from-sipgate] > > Delete the braces around the context! > >> fromuser = USERNAME >> username = USERNAME >> defaultuser = USERNAME >> secret = SECRET >> host = sipgate.co.uk >> fromdomain = sipgate.co.uk >> dtmfmode = rfc2833 >> canreinvite = no >> disallow = all >> allow = alaw >> allow = ulaw >> nat = yes >> qualify = yes >> outboundproxy=proxy.live.sipgate.co.uk >> >> ----------------- >> extensions.conf: (not sure if it matters where this goes in the >> extensions.conf file…) >> >> ; Trunk from sipgate [sipgate.co.uk] >> [from-sipgate] >> exten => USERNAME,1,Noop(Incoming SIP call from ${CALLERID(all)} @ sipgate >> calling ${EXTEN}) >> exten => USERNAME,n,SetCallerID(Via SipGate <${CALLERID(num)}>) >> exten => USERNAME,n,Dial(SIP/101) >> >> ; USERNAME = trunk login username > > > I have some customers in Germany with similar settings as you (except > outbound proxy). > > Michael > > http://www.mksolutions.info > > > > > ------------------------------------------------------------------------------ > See everything from the browser to the database with AppDynamics > Get end-to-end visibility with application monitoring from AppDynamics > Isolate bottlenecks and diagnose root cause in seconds. > Start your free trial of AppDynamics Pro today! > http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk_______________________________________________ > Astlinux-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > [email protected]. ------------------------------------------------------------------------------ See everything from the browser to the database with AppDynamics Get end-to-end visibility with application monitoring from AppDynamics Isolate bottlenecks and diagnose root cause in seconds. Start your free trial of AppDynamics Pro today! http://pubads.g.doubleclick.net/gampad/clk?id=48808831&iu=/4140/ostg.clktrk _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
