Hi Lonnie,
I originally was testing with two different Alix 3d2 boards, and was
seeing the same behavior.
I only have one net5501 board to play with at this time.
On the Alix boards, I was removing power from the DC side, whereas
on the net5501, I was removing from the AC side.
Definitely has me confused ...
A bit of background on this project. Originally on this net5501 we
were using the Askozia PBX, but want to move to the Astlinux for better
flexibility. Using the same net5501 board & compact flash, I can't get the
Askozia to fail.
That being said, I don't know the filesystem structure of Askozia, and
whether or not they run fsck. I don't see any fsck console output on the
Askozia load.
Thx, Martin
------------------------------------------------------------------------------
_______________________________________________
Astlinux-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
[email protected].
