Hi Stefan,

I think I speak for the AstLinux team saying we have no plans to stray from the 
x86 architecture we now support.  While supporting the ARM architecture is 
theoretically possible with our build system, it is not as simple as creating 
an alternate ARM toolchain to compile with.

>From a practical point of view, if cost is a primary issue, repurposing a used 
>x86 thin client as John Novack suggested or PCEngines ALIX (alix2d13) is an 
>inexpensive (though somewhat outdated) x86 board.

As an aside, the new Intel Atom C2000 SoC processors are a perfect match for 
AstLinux (low power, no video, 4x NIC's built-in, AES-NI instruction) and have 
the possibility of low cost boards for the 2-core versions.  Our next release 
of AstLinux (1.2.0) will support the Atom C2000 NIC's and AES-NI instruction.

Lonnie


On Sep 22, 2014, at 1:33 AM, Stefan Ulm <s....@divus.biz> wrote:

> Hi,
>  
> Is there any possibility to bring asltinux on raspberry PI or beaglebone?
>  
>  
> Best regards
>  
> Stefan Ulm
> Technical Department - Research & Development
> stefan....@divus.eu
>         
>  
>         
> <image004.jpg>
> <image005.jpg>                <image006.jpg>
>  
> 
> <image007.png>
>                     
>      HEADQUARTERS
>      Pillhof, 51 . I-39057 Eppan (BZ)
>      Tel. +39 0471 633 662 . Fax. +39 0471 631 829
>      www.divus.eu
>      Privacy


------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to 
pay...@krisk.org.

Reply via email to