> Am 30.08.2017 um 05:17 schrieb Michael Knill
> <michael.kn...@ipcsolutions.com.au>:
>
> Hmm looks like Monit will need to go as nearly 15M.
> Chrony is also fairly heavy on memory. Is this all I have in 1.2.10?
> Do I disable SNMP by just removing mnt/kd/snmp/snmpd.conf ?
> I have PHP using 45M plus. Is this normal? Anything I can do in php.ini?
>
> Regards
> Michael Knill
>
> -----Original Message-----
> From: Michael Knill <michael.kn...@ipcsolutions.com.au>
> Reply-To: AstLinux List <astlinux-users@lists.sourceforge.net>
> Date: Wednesday, 30 August 2017 at 12:45 pm
> To: AstLinux List <astlinux-users@lists.sourceforge.net>
> Subject: Re: [Astlinux-users] Getting high processor load on ALIX box
>
> Hmm Im a bit worried actually about upgrading to 1.2.10 with Asterisk 13 on
> my ALIX boxes.
> Some sites showing 5M free.
>
> Regards
> Michael Knill
>
> -----Original Message-----
> From: Lonnie Abelbeck <li...@lonnie.abelbeck.com>
> Reply-To: AstLinux List <astlinux-users@lists.sourceforge.net>
> Date: Wednesday, 30 August 2017 at 12:13 pm
> To: AstLinux List <astlinux-users@lists.sourceforge.net>
> Subject: Re: [Astlinux-users] Getting high processor load on ALIX box
>
> Michael,
>
> Since this is an ALIX box, (low RAM, low performance) best to not enable
> anything "extra" IMHO.
>
> Lonnie
>
>
> On Aug 29, 2017, at 8:45 PM, Michael Knill
> <michael.kn...@ipcsolutions.com.au> wrote:
>
>> So do you think I should turn it off by default and only turn it on when I
>> need it?
>>
>> Regards
>> Michael Knill
>>
>> From: Michael Knill <michael.kn...@ipcsolutions.com.au>
>> Reply-To: AstLinux List <astlinux-users@lists.sourceforge.net>
>> Date: Wednesday, 30 August 2017 at 9:01 am
>> To: AstLinux List <astlinux-users@lists.sourceforge.net>
>> Subject: [Astlinux-users] Getting high processor load on ALIX box
>>
>> Hmm I liked it better before I implemented Monit. Blissful ignorance ☺
>>
>> I got am email from one of my servers with the following:
>> Event: Resource limit matched
>> Service
>> 3016-Tilton-CM1
>> Date: Tue, 29 Aug 2017 16:26:14
>> Action: alert
>> Host: 3016-Tilton-CM1
>> Description: loadavg(5min) of 2.2 matches resource limit
>> [loadavg(5min) > 2.0]
>>
>> I found this in the logs of the server:
>> Aug 29 16:04:23 3016-Tilton-CM1 user.info kernel: AIF:Port 0 OS fingerprint:
>> IN=ppp0 OUT= MAC= SRC=221.122.59.98 DST=115.187.184.60 LEN=69 TOS=0x00
>> PREC=0x00 TTL=44 ID=31131 PROTO=UDP SPT=6973 DPT=0 LEN=49
>> Aug 29 16:04:56 3016-Tilton-CM1 daemon.debug darkstat[1424]: WARNING:
>> pcap_dispatch took too long (took 1023275970 nsec, over threshold of
>> 1000000000 nsec)
>> Aug 29 16:04:56 3016-Tilton-CM1 daemon.debug darkstat[1424]: WARNING: event
>> processing took longer than a second (took 1319566069 nsec, over threshold
>> of 1000000000 nsec)
>> Aug 29 16:05:02 3016-Tilton-CM1 daemon.debug darkstat[1424]: WARNING:
>> pcap_dispatch took too long (took 1274262839 nsec, over threshold of
>> 1000000000 nsec)
>> Aug 29 16:05:02 3016-Tilton-CM1 daemon.debug darkstat[1424]: WARNING: event
>> processing took longer than a second (took 1461235038 nsec, over threshold
>> of 1000000000 nsec)
>> Aug 29 16:05:04 3016-Tilton-CM1 daemon.debug darkstat[1424]: WARNING: event
>> processing took longer than a second (took 1057674551 nsec, over threshold
>> of 1000000000 nsec)
>> Aug 29 16:05:11 3016-Tilton-CM1 daemon.debug darkstat[1424]: WARNING: event
>> processing took longer than a second (took 1513263031 nsec, over threshold
>> of 1000000000 nsec)
>> Aug 29 16:05:14 3016-Tilton-CM1 daemon.debug darkstat[1424]: WARNING:
>> pcap_dispatch took too long (took 1548211950 nsec, over threshold of
>> 1000000000 nsec)
>> Aug 29 16:05:14 3016-Tilton-CM1 daemon.debug darkstat[1424]: WARNING: event
>> processing took longer than a second (took 2129665587 nsec, over threshold
>> of 1000000000 nsec)
>>
>> ..... and lots more
>>
>> Should I turn off the Netstat server? I assume this turns off darkstat!
>>
>> Regards
>> Michael Knill
Hi Michael,
I have a few Alix 2D13 PBX running in the field (with Asterisk 11 though). They
usually have between 100 and 50 MB of free RAM.
I always create my own builds for them and leave out all packages that I don't
need (e.g. netsnmp, Zabbix).
I also don't enable Monit on Geode CPUs, cause there are some memory related
issues over a longer time period.
I you want I can send you my Buildroot .config file offlist.
Since there will be no official Alix/net5501 builds in the future, you need to
build yourself anyway.
Michael
http://www.mksolutions.info
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.