My AstLinux is installed on an APU1D4 behind a pfSense machine, e.g. the AstLinux firewall is disabled and the only AstLinux interface I am using is "external interface on eth0". AstLinux is working now for about two years without any issues.
I have recently discovered that my ISP provides real dual stack IPv4/IPv6 connectivity. Therefore I have started to play with IPv6 to improve my knowledge. I changed the pfSense configuration to obtain an IPv6 address besides the IPv4 one. Furthermore, I am using stateless autoconfiguration (SLAAC) to provide IPv6 global addresses to my various devices in my different wired and wireless home networks. This works fine with all devices tested so far. No I would like to obtain a global IPv6 address on the external interface of AstLinux. I tested various configurations on the page "Network Configuration Settings" and subsections "External Interface" and "External DHCPv6 Client Settings" of the WebGUI without success so far. All I could achive is a link-local address for the external interface but I would like to obtain a global IPv6 address from pfSense. I appreciate any comments on this. As I have just recently started to learn IPv6, I may even suffer from a basic misunderstanding. Thanks in advance, Peter ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
