Cool thanks Lonnie I would probably rather specify the MAX_DELAY actually if I had to specify something e.g. set to 1 second. Realistically though if I need to add something to bypass the check then there is a risk that I will forget to remove it.
Good option though. Regards Michael Knill -----Original Message----- From: Lonnie Abelbeck <li...@lonnie.abelbeck.com> Reply-To: AstLinux List <astlinux-users@lists.sourceforge.net> Date: Friday, 22 September 2017 at 10:56 am To: AstLinux List <astlinux-users@lists.sourceforge.net> Subject: Re: [Astlinux-users] Power outages and SIP Trunks Hi Michael, Great it works for you. Thanks for the feedback. If "a little annoying during build" means while testing when no internet connection, you could define your own variable, ex. IPCSOLUTIONS_TARGET_HOST Updated script by sourcing /etc/rc.conf and using IPCSOLUTIONS_TARGET_HOST if it is defined: https://gist.github.com/abelbeck/5f2b6e0c23ffc0394826cd4681a35879 In this case if IPCSOLUTIONS_TARGET_HOST is not defined, the value 8.8.4.4 (or whatever you set as the default) will be used. During setup you could define in your /mnt/kd/rc.conf.d/users.conf file to point to localhost or some internal IP address -- IPCSOLUTIONS_TARGET_HOST="127.0.0.1" -- Track revisions here: (missed a dollar-sign in revision #2) Click "View" for any revision. https://gist.github.com/abelbeck/5f2b6e0c23ffc0394826cd4681a35879/revisions OR, just add the rc.elocal script as the last step in your build, OR leave the "chmod 755 /mnt/kd/rc.elocal" to the very end or push to install time. Lonnie On Sep 21, 2017, at 7:05 PM, Michael Knill <michael.kn...@ipcsolutions.com.au> wrote: > Thanks Lonnie this script works perfectly. > Its going to be a little annoying during build but its worth it! > > Regards > Michael Knill > > -----Original Message----- > From: Lonnie Abelbeck <li...@lonnie.abelbeck.com> > Reply-To: AstLinux List <astlinux-users@lists.sourceforge.net> > Date: Tuesday, 19 September 2017 at 11:02 am > To: AstLinux List <astlinux-users@lists.sourceforge.net> > Subject: Re: [Astlinux-users] Power outages and SIP Trunks > > Hi Michael, > > I'm not sure if this will help, but here is a rc.elocal script that waits > until a target host can be pinged ... > > Startup delay using /mnt/kd/rc.elocal > https://gist.github.com/abelbeck/5f2b6e0c23ffc0394826cd4681a35879 > > Make the file executable, test in your lab, ideally change the IPv4 address > to your SIP provider or such. > > Note you can't use DNS names since the resolver is not configured at this > point. > > Probably disable WANDELAY when using this. > > Lonnie > > > On Sep 17, 2017, at 5:55 PM, Michael Knill > <michael.kn...@ipcsolutions.com.au> wrote: > >> Hi All >> >> Im starting to see a number of issues on my SIP Trunks when there is a power >> outage at the site. I assume the issues is when both the modem and Astlinux >> appliance are power reset, if the modem does not come up as fast as >> Astlinux, the PPPoE interface will not be available for Asterisk and for >> some reason the SIP Trunk stays down until you do a reload. >> >> Yes there is a WAN delay parameter for this but is there something else I >> can do to make this a bit more robust? >> Does anyone know what actually causes this? Why does it not keep trying? >> Does it just give up when there is no route? >> Should I maybe have a static default route with a high metric pointing to >> null or something else? >> >> Regards >> Michael Knill > > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > pay...@krisk.org. > > > ------------------------------------------------------------------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Astlinux-users mailing list > Astlinux-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to > pay...@krisk.org. > > ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.