Hi Twanny
You need to extract the .img file from ISO and dd to the ALIX compact flash.
The ISO is an installer that you place on a USB or CD that writes to internal
storage. I think you are not able to boot from USB on the ALIX.
PS I would recommend the APU2 as the ALIX is getting pretty old and I have had
lots of issues with running out of resources with the later Astlinux versions.
https://doc.astlinux-project.org/userdoc:new-install
Regards
Michael Knill
From: twanny Azzopardi <twanny.azzopa...@gmail.com>
Reply-To: AstLinux List <astlinux-users@lists.sourceforge.net>
Date: Tuesday, 17 April 2018 at 9:31 pm
To: AstLinux List <astlinux-users@lists.sourceforge.net>
Subject: [Astlinux-users] Installing astlinux-1.2.10-alix-serial.iso
Hello astlinux,
I'm trying to install astlinux-1.2.10-alix-serial.iso onto my old Alix.2d board.
I'm doing dd if= astlinux-1.2.10-alix-serial.iso of=/dev/sdb. Then from the
console I get missing NTLDR!
What am I doing wrong?
Regards,
Twanny.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
