After the weekend I upgraded my Astlinux system with my new release of config files but the Astlinux version remained the same as 1.3.2. Now all the Yealink phones connecting with OpenVPN connect fine as shown on the Status Tab but I cannot ping them. When I make a connection via my laptop via OpenVPN I also cant ping the server. What would cause the OpenVPN to break on an Astlinux box? What tests should I do next? I have these exact files in other systems and its fine.
Details: ### gui.openvpn.conf - start ### ### ### Auth Method OVPN_USER_PASS_VERIFY="no" ### Device OVPN_DEV="tun0" ### Port Number OVPN_PORT="1194" ### Protocol OVPN_PROTOCOL="udp" ### Log Verbosity OVPN_VERBOSITY="1" ### Compression OVPN_LZO="yes" ### QoS Passthrough OVPN_QOS="yes" ### Cipher OVPN_CIPHER="" ### Auth HMAC OVPN_AUTH="" ### Allowed External Hosts OVPN_TUNNEL_HOSTS="0/0" ### Server Hostname OVPN_HOSTNAME="21010.ibcaccess.net" ### Server IPv4 Network OVPN_SERVER="172.30.253.0 255.255.255.0" ### Server IPv6 Network OVPN_SERVERV6="" ### Topology OVPN_TOPOLOGY="subnet" ### Server Push OVPN_PUSH=" route 172.30.20.0 255.255.255.0 " ### Raw Commands OVPN_OTHER=" ifconfig-pool-linear " ### Private Key Size OVPN_CERT_KEYSIZE="2048" ### Signature Algorithm OVPN_CERT_ALGORITHM="sha256" ### CA File OVPN_CA="/mnt/kd/openvpn/webinterface/keys/ca.crt" ### CERT File OVPN_CERT="/mnt/kd/openvpn/webinterface/keys/server.crt" ### Key File OVPN_KEY="/mnt/kd/openvpn/webinterface/keys/server.key" ### DH File OVPN_DH="/mnt/kd/openvpn/webinterface/dh1024.pem" ### TLS-Auth File OVPN_TA="" ### gui.openvpn.conf - end ### Regards Michael Knill
_______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
