Hi Patrick
If its just a host, I think its best to turn off the firewall altogether on the
Network Tab and then add your route to rc.elocal.
Regards
Michael Knill
On 28/4/20, 8:53 am, "Patrick Warichet" <patrick.waric...@gmail.com> wrote:
Hello,
I had to migrate my Astlinux appliance from being my
router/firewall/SIP/etc. and hooked it up to a new router/firewall
that I have to test. I like to keep using Astlinux for several
services (DNScrypt, DHCP, SIP, etc.) that are not available on the
firewall but I am facing 2 issues.
I do not want to use the EXTIF anymore (since the system is only a
host and connected to my local LAN) and just use the INTIF, but even
disconnected the EXTIF (eth0 in my case) is used for the default route
even when I configure "ip route add to 0.0.0.0/0 via 192.168.1.1 dev
eth1" in rc.elocal.
Another issue, how to change the default gw parameter from dnsmasq ?
I added "dhcp-option=lan,option:router,192.168.1.1" in dnsmasq.static
but it keeps on using the local IP address of the eth1 interface in
the lease it sends out (confirmed by looking at dnsmasq.conf).
Thank you for your help
/Patrick
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
