> Am 07.05.2020 um 21:41 schrieb nedi <n...@gmx.ch>: > > Thanks, > I thing that was Mac issue. With serial app works
Great. > Which version do you recomend me to load > genx86_64-serial-1.3.8-asterisk-13.23.1se [1] | | > | | genx86_64-serial-1.3.8-asterisk-13.31.0 [2] | | > | | genx86_64-serial-1.3.8-asterisk-16.8.0 [3] > Nedi Asterisk 13.23.1 SE is without PJSIP and based on an older "certified" version. Asterisk 13.13.0 is the latest 13 version Asterisk 16.8.0 is the latest 16 version. I personally use the 16 version and have no issues. >> Am 07.05.2020 um 21:30 schrieb Michael Keuter <li...@mksolutions.info>: >> >> >> >>> Am 07.05.2020 um 21:13 schrieb Lonnie Abelbeck <li...@lonnie.abelbeck.com>: >>> >>> Nedi, >>> >>> Followup, bottom line, there is something goofy with the macOS 'screen'. >>> >>> I just tried the astlinux-1.3.8-genx86_64-serial.iso installer on the APU2. >>> >>> If I use the "Serial" macOS application, it works just fine. >>> https://www.decisivetactics.com/products/serial/ >>> >>> If I use "minicom" on an old MacBook, it works fine. >>> >>> I used another AstLinux box (I have lots of them), same USB/serial >>> converter connected to AstLinux, ssh into AstLinux and issue: >>> -- >>> screen --version >>> Screen version 4.08.00 (GNU) 05-Feb-20 >>> >>> screen /dev/ttyUSB0 115200 >>> -- >>> it works fine. >>> >>> But, if I use macOS's screen: >>> -- >>> screen --version >>> Screen version 4.00.03 (FAU) 23-Oct-06 >>> >>> screen /dev/tty.usbserial-A102MMV1 115200 >>> --- >>> as soon as the menus appear, the screen flashes wildly as if I was typing >>> characters. >>> >>> Bottom line, don't use the macOS 'screen' with a USB/serial adapter and >>> expect it to always work. >>> >>> Lonnie >> >> As a free alternative you can try ZTerm: >> https://dalverson.com/zterm/ >> >> It is very, very old, but still work for me on High Sierra (I guess it will >> not work on Catalina anymore). >> >>>> On May 7, 2020, at 1:22 PM, Lonnie Abelbeck <li...@lonnie.abelbeck.com> >>>> wrote: >>>> >>>> Nedi, >>>> >>>> Very weird you can receive data but not send. >>>> >>>> On my MacBook Air, USB to serial and a NULL modem cable to APU2. >>>> ---- >>>> $ ls /dev/tty.* >>>> /dev/tty.Bluetooth-Incoming-Port /dev/tty.usbserial-A102MMV1 >>>> >>>> $ screen /dev/tty.usbserial-A102MMV1 115200 >>>> >>>> ## interact over serial >>>> ## exit with Control-a Control-\ (confirm with y) >>>> >>>> [screen is terminating] >>>> ---- >>>> >>>> Have you used your USB/serial terminal setup successfully before ? >>>> >>>> Lonnie >>>> >>>> >>>> >>>> >>>>> On May 7, 2020, at 11:43 AM, nedi <n...@gmx.ch> wrote: >>>>> >>>>> Hi lonnie, >>>>> Yes I have SSD on slot 3 mSATA >>>>> I Used the Image astlinux-1.3.8-genx86_64-serial.iso >>>>> I made USB boot stick with windows 10 Rufus in DD image mode >>>>> >>>>> I see booting I can chose F10 and make memory test after that or >>>>> directtly if I don’t press F10 I can booting directly to the astlinux, >>>>> the installer menu appears and if the menu appears I can’t chose >>>>> anything. >>>>> >>>>> if I press enter or arows nothing happend >>>>> >>>>> Nedi >>>>> >>>>>> Am 07.05.2020 um 18:11 schrieb Lonnie Abelbeck >>>>>> <li...@lonnie.abelbeck.com>: >>>>>> >>>>>> >>>>>> >>>>>>> On May 7, 2020, at 10:02 AM, nedi <n...@gmx.ch> wrote: >>>>>>> >>>>>>> Hi, >>>>>>> I have new apu4d2 Mainboard. Installer hang on Astlinux installer >>>>>>> menu, I can’t install if I press enter in the Terminal or on physical >>>>>>> usb keyboard. >>>>>>> I use USB Serial Adapter on my Mac OSX and Baudrate is 115200 >>>>>>> Bios Version is 4.11.0.2 >>>>>>> screen /dev/cu.usbserial 115200 >>>>>>> >>>>>>> Regards >>>>>>> Nedi >>>>>> >>>>>> Questions ... >>>>>> >>>>>> Do you have a mSATA SSD installed in the APU2 in the proper slot >>>>>> (labeled mSATA) ? >>>>>> >>>>>> Did you use this ISO ... >>>>>> Generic x86-64bit (Serial Console): >>>>>> https://s3.amazonaws.com/mirror.astlinux-project/downloads/iso/astlinux-1.3.8-genx86_64-serial.iso >>>>>> >>>>>> Did you use something like this to copy the ISO to a USB drive: (macOS) >>>>>> https://abelbeck.com/lonnie/astlinux/info/os-x-cf-write.php >>>>>> >>>>>> >>>>>> If "yes" to all the above, what do you mean by "Installer hang" ? >>>>>> >>>>>> Lonnie >> >> Michael Michael http://www.mksolutions.info _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
