> Am 24.05.2020 um 23:24 schrieb Lonnie Abelbeck <li...@lonnie.abelbeck.com>: > > > >> On May 24, 2020, at 3:49 PM, Michael Keuter <li...@mksolutions.info> wrote: >> >> Try running the "yes" stresstest in the container, with the above >> limitations. > > If I define lxc.cgroup.cpuset.cpus to 1, or 2 or 3, the "yes" stress-test [1] > only uses one core. > > Setting lxc.cgroup.cpuset.cpus=4 the container does not start. > > Not setting lxc.cgroup.cpuset.cpus all 4 cores are used. > > Lonnie > > [1] > (start test) > # for x in 1 2 3 4; do ( yes >/dev/null & ); done > > (stop test) > # killall yes
---- From the man page: lxc-cgroup -n foo cpuset.cpus "0,3" assign the processors 0 and 3 to the container. ---- I guess you define which CPU cores are allowed to use (0-3), that's why 4 does not work :-). lxc.cgroup.cpuset.cpus=0,3 (maybe in quotes, should use core 1 and 4) >>> Am 24.05.2020 um 22:35 schrieb Lonnie Abelbeck <li...@lonnie.abelbeck.com>: >>> >>> I tried >>> -- >>> lxc.cgroup.memory.limit_in_bytes = 512M >>> lxc.cgroup.cpuset.cpus = 1 >>> -- >>> and 'htop' show 4 cores and 4 GB of RAM. >>> >>> Kind of makes sense sense /proc/ is shared. >>> >>> There is an optional lxcfs (uses FUSE) that offers a different /proc/ to >>> each container, but don't really think this is needed with AstLinux. >>> >>> Lonnie >> >> Try running the "yes" stresstest in the container, with the above >> limitations. >> >>>> On May 24, 2020, at 3:25 PM, Michael Keuter <li...@mksolutions.info> wrote: >>>> >>>> I did some tests and at least the number of cores worked for me. Look at >>>> these optional commands: >>>> >>>> https://doc.astlinux.org/userdoc:guest_lxc_container#optional >>>> >>>> The CPU shares are to set priorities between multiple containers. But it >>>> needs to be tested more. >>>> >>>> >>>>> Am 24.05.2020 um 22:17 schrieb Lonnie Abelbeck >>>>> <li...@lonnie.abelbeck.com>: >>>>> >>>>> Hi Michael, >>>>> >>>>> Not currently. >>>>> >>>>> For the AstLinux case we did not see much of an issue if the LXC can see >>>>> all cores and all RAM. >>>>> >>>>> Lonnie >>>>> >>>>> >>>>>> On May 24, 2020, at 3:12 PM, Michael Knill >>>>>> <michael.kn...@ipcsolutions.com.au> wrote: >>>>>> >>>>>> Can you limit CPU resources to the LXC container? >>>>>> >>>>>> Regards >>>>>> Michael Knill >>>>>> >>>>>> On 24/5/20, 8:08 pm, "Michael Keuter" <li...@mksolutions.info> wrote: >>>>>> >>>>>> >>>>>> >>>>>>> Am 24.05.2020 um 07:35 schrieb Michael Knill >>>>>>> <michael.kn...@ipcsolutions.com.au>: >>>>>>> >>>>>>> Not really knowing anything about LXC Containers, just wondering if I >>>>>>> could install Centos and run QueueMetrics on the same box. >>>>>>> This would be a pretty cool option! >>>>>>> >>>>>>> https://www.queuemetrics.com/install-queuemetrics.jsp >>>>>>> https://www.queuemetrics.com/blog/2018/12/04/dimensioning-queuemetrics/ >>>>>>> >>>>>>> Regards >>>>>>> Michael Knill >>>>>> >>>>>> Hi Michael, >>>>>> >>>>>> in general this should work, but needs to be tested. >>>>>> The question is how much diskspace, RAM and CPU power will be needed. >>>>>> All is shared with the host. >>>>>> >>>>>> Michael >>>> >>>> Michael Michael http://www.mksolutions.info _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
