Would it be worth turning on UPnP do you think?
Regards
Michael Knill
On 15/10/20, 8:08 am, "Michael Knill" <michael.kn...@ipcsolutions.com.au>
wrote:
Hi Guys
It seems that this was working fine when the Cisco router was in place and
only stopped when the Astlinux box was put in place.
Looking at the Cisco router I do see 'ip forward-protocol nd' with nd being
the Neighbor Discovery Protocol which may have been the reason it worked.
Is it possible to set this up on Astlinux?
Regards
Michael Knill
On 14/10/20, 7:34 am, "Michael Knill" <michael.kn...@ipcsolutions.com.au>
wrote:
Hi Lonnie. Good question.
I have a site with two customers sharing the same network and telephony
infrastructure.
The data network is segregated for the two customers but there is a
single shared printer on one of the networks.
The customer on the other network is having problems with the printer
and their current IT provider has said that because the driver is so crap, the
printer needs to be on the same network (Sigh!)
Also this network has a number of statically assigned devices.
I must admit that as I write this, I'm not sure this is going to solve
the problem. So ridiculous!
Thanks guys though for the info.
Regards
Michael Knill
On 14/10/20, 12:22 am, "Lonnie Abelbeck" <li...@lonnie.abelbeck.com>
wrote:
A question to Michael Knill, can you help us understand why you
want to add an additional IP to a LAN ?
A comment, when adding network commands to rc.elocal, it is best to
use 'ip' (iproute2) instead of 'ifconfig' (busybox).
So, if for some reason you want to add 192.168.99.1/32 to eth1,
simply:
--
ip addr add 192.168.99.1/32 dev eth1
--
If for some reason you want it to look like an old-style ifconfig
'alias' with label 'eth1:1', add the label:
--
ip addr add 192.168.99.1/32 dev eth1 label eth1:1
--
Lonnie
> On Oct 13, 2020, at 3:03 AM, Michael Keuter
<li...@mksolutions.info> wrote:
>
>
>
>> Am 13.10.2020 um 06:16 schrieb Michael Knill
<michael.kn...@ipcsolutions.com.au>:
>>
>> Hi Group
>>
>> Is there a way to add a secondary LAN IP Address with Astlinux?
>> I cant see an INTIP_ALIAS variable!
>>
>> Regards
>> Michael Knill
>
>
https://www.cyberciti.biz/faq/linux-creating-or-adding-new-network-alias-to-a-network-card-nic/
>
> You have to add this to rc.elocal to make it persistent.
>
> Michael
>
> http://www.mksolutions.info
>
>
>
>
>
> _______________________________________________
> Astlinux-users mailing list
> Astlinux-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/astlinux-users
>
> Donations to support AstLinux are graciously accepted via PayPal
to pay...@krisk.org.
>
>
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to
pay...@krisk.org.
