> On Nov 16, 2025, at 12:47 AM, [email protected] wrote: > > The kernel panic happens after I've booted from the USB drive and started the > installation process. The install just stops after a few seconds. The > target drive is untouched, as far as I can tell. > > Would it be helpful to see the console output?
That would help to give context. I'm wondering if the kernel is actually booting or not, possibly the creation of the bootable USB drive is the issue. It could be a BIOS configuration issue as well. Without any context it is hard to diagnose. PS: Another thought, you mentioned placing a SSD into the M.2 Mini-PCIe slot, that could be causing an issue since that is only made for a WiFi card. For the Lanner NCA-1510 with AstLinux, you need either the optional 2.5" SATA cable with SSD or install to and run off a USB boot drive [1] [2]. Lonnie [1] Example: SAMSUNG FIT Plus 3.1 USB Flash Drive, 128GB [2] https://doc.astlinux-project.org/userdoc:boot-usb-storage _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [email protected].
