On 8/5/2014 3:11 PM, Michal Kazior wrote: > On 5 August 2014 14:59, Hayat, Samira <[email protected]> wrote: >> Hi, >> >> I have been trying to get hostapd running for 80211ac. I have a card >> that supports n/ac. I used backports to get ath10k running on my kernel. >> the output of >> >> lsmod | grep ath10k >> >> is: >> >> ath10k_pci 41185 0 >> ath10k_core 137353 1 ath10k_pci >> mac80211 613458 1 ath10k_core >> ath 28966 1 ath10k_core >> cfg80211 586956 3 ath10k_core,mac80211,ath >> compat 29841 3 ath10k_pci,mac80211,cfg80211 >> >> I have tried running hostapd with config_80211n and config_80211ac >> enabled in the .config file. Even having done that, I get >> >> Configuration file: ./hostapd-minimal.conf >> Line 8: unknown configuration item 'ht_capab' >> Line 9: unknown configuration item 'ieee80211n' >> Line 10: unknown configuration item 'ieee80211ac' >> Line 11: unknown configuration item 'vht_oper_chwidth' >> Line 12: unknown configuration item 'vht_oper_centr_freq_seg0_idx' >> 5 errors found in configuration file './hostapd-minimal.conf' >> Failed to set up interface with ./hostapd-minimal.conf >> Failed to initialize interface > Your hostapd doesn't seem to have 11n nor 11ac support compiled in. > You might reconsider taking a look at your hostapd's .config file > again. You can compare it with mine: http://pastebin.com/NG58DWuq > > > Michał > This is my .config file:
CONFIG_DRIVER_HOSTAP=y CONFIG_DRIVER_NL80211=y CONFIG_IAPP=y CONFIG_RSN_PREAUTH=y CONFIG_PEERKEY=y CONFIG_IEEE80211W=y CONFIG_EAP=y CONFIG_EAP_MD5=y CONFIG_EAP_TLS=y CONFIG_EAP_MSCHAPV2=y CONFIG_EAP_PEAP=y CONFIG_EAP_GTC=y CONFIG_EAP_TTLS=y CONFIG_IPV6=y CONFIG_IEEE80211N=y CONFIG_IEEE80211AC=y CONFIG_ACS=y Just the minimum requirements to get 802.11ac running. Am I missing something? Regards, Samira _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
