On 09/11/2014 03:35 AM, Michal Kazior wrote:
On 29 August 2014 23:45, Ben Greear <[email protected]> wrote:
On 08/22/2014 12:52 AM, Michal Kazior wrote:
This is just a reference for anyone interested in
getting injection working with ath10k.
Did you try this with encryption? I can reproduce the crash
in open mode on my CT firmware, but I couldn't even get
DHCP to complete with wpa2 enabled.
Hi,
Late reply, sorry.
I've just did a quick test on 10.2 (both AP and STA) with WPA2.
Apparently the raw tx mode requires IV to be set up on host and packet
length (reported in HTT Tx command header) must be re-adjusted
differently, otherwise frames are broken (incorrect FCS, too long,
somewhat encrypted except LLC/SNAP). The best I could get were
FCS-correct undecryptable frames on air. Perhaps someone will figure
that out..
Another way around this would be to perform software crypto for tx
entirely on host.
That did not fix the problem for me. The firmware/hardware could not be
convinced (by me, at least) to leave the encrypted packet alone and insisted on
doing at least partial re-crypt, or something like that.
Thanks,
Ben
Michał
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
