On 23 September 2014 02:20, Ben Greear <[email protected]> wrote: > While testing the previously posted patches that fix up the > transmit rate for 3x3 NICs configured for 2x2 chainmask, I > noticed that an ath10k configured as 3x3 AP will use only > 1x1 rates when transmitting to a 2x2 station. > > From debugging so far, it appears the root cause is that > the method ath10k_peer_assoc_h_ht in mac.c is passed an > sta with rx_nss set to 3, when in fact the station *should* > be showing up as 2x2. > > Possibly station system is still messed up some how...
Am I understanding correctly that the 2x2 station is just a 3x3 ath10k device with "tx/rx_chainmask" being set to 0x3? If so then rx_nss being 3 is okay because setting chainmasks does not affect advertised capabilities and association sequences remain unaffected. The problem might be the hw rate control is unable to deal with the strange chainmask setup. Did you try 10.2? I've been told it contains some rate control improvements. Michał _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
