[email protected] writes: > From: Ben Greear <[email protected]> > > It appears it takes more than just setting the > hardware's chainmask to make things work well. Without > this patch, a vdev would only use 1x1 rates when chainmask > was set to 0x3. > > Setting the 'nss' (number of spatial streams) on the vdev > helps the firmware's rate-control algorithm work properly. > > Tested on CT firmware, but probably this works (and > is required) on normal firmware. > > Signed-off-by: Ben Greear <[email protected]> > --- > > v2: Add warning if chainmask is set to probably-invalid configuration. > Also, from a quick test, it appears you cannot even set the chainmask > using 'iw' when vdevs are active.
Thanks, applied. -- Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
