By default rts protection is enabled in firmware for the second rateset. Currently ath10k selects RTS profile (only for software retries), when legacy stations are associated or asked by mac80211. On congested environment, when AP is running in HT/VHT mode and there are no legacy clients associated, this will impact the robustness. Also enabling RTS protection only for second rateset will not impact performance on clear environment. Fix that.
Signed-off-by: Rajkumar Manoharan <[email protected]> --- drivers/net/wireless/ath/ath10k/mac.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 84a243e..37141b3 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -798,12 +798,14 @@ static int ath10k_recalc_rtscts_prot(struct ath10k_vif *arvif) vdev_param = ar->wmi.vdev_param->enable_rtscts; - if (arvif->use_cts_prot || arvif->num_legacy_stations > 0) - rts_cts |= SM(WMI_RTSCTS_ENABLED, WMI_RTSCTS_SET); + rts_cts |= SM(WMI_RTSCTS_ENABLED, WMI_RTSCTS_SET); if (arvif->num_legacy_stations > 0) rts_cts |= SM(WMI_RTSCTS_ACROSS_SW_RETRIES, WMI_RTSCTS_PROFILE); + else + rts_cts |= SM(WMI_RTSCTS_FOR_SECOND_RATESERIES, + WMI_RTSCTS_PROFILE); return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, rts_cts); -- 2.3.1 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
