The uart_pin was incorrectly configured for QCA9377 and the recently added hw_params were omitted.
Signed-off-by: Bartosz Markowski <[email protected]> --- drivers/net/wireless/ath/ath10k/core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index c8f6ca284b9d..a30d41559134 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -141,8 +141,10 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { .id = QCA9377_HW_1_1_DEV_VERSION, .name = "qca9377 hw1.1", .patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR, - .uart_pin = 7, + .uart_pin = 6, .otp_exe_param = 0, + .channel_counters_freq_hz = 88000, + .max_probe_resp_desc_thres = 0, .fw = { .dir = QCA9377_HW_1_0_FW_DIR, .fw = QCA9377_HW_1_0_FW_FILE, -- 2.1.2 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
