On 31 January 2016 at 08:31, Manoharan, Rajkumar <[email protected]> wrote: >>> Below patchset adds fast path support for uplink traffic by bypassing >>> HTC layer processing. This is enabled by making use of unused copy >>> engine 5 to receive HTT messages directly from HIF layer. From initial >>> validation in VHT80/5G mode TCP UL is improved to 900Mbps from ~840Mbps >>> in conducted test. >>> >> >>Hi Rajkumar, >> >>I'm very curious what hardware did you use to do the tests? >>Because with Dragonfly+Peregrine 3x3 I'm able to get only ~550Mbps :( >> > > Roman, > > It is verified in AP148 platform which IPQ8064 (1.4GHz dual core) platform. > Throughput will be lower in low end systems like AP135 (unicore processor).
OK, but QSDK built with proprietary driver can reach 800Mbps at least. 900/800 Mbps difference is fine (ethernet software bridging is >900, e.g.) but 900/550 Mbps difference is not fine, there must be something ath10k is not doing or doing in a wrong way. Regards, Roman _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
