[email protected] writes: > QCA6147 monitor mode stopped working ever since after kernel v4.3. > Here is the firmware crash log: > > Feb 13 01:39:36 darkstar kernel: [ 34.010363] ath10k_pci 0000:01:00.0: > qca6174 hw2.1 target 0x05010000 chip_id 0x003405ff sub 168c:3344 > Feb 13 01:39:36 darkstar kernel: [ 34.010373] ath10k_pci 0000:01:00.0: > kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0 > Feb 13 01:39:36 darkstar kernel: [ 34.012252] ath10k_pci 0000:01:00.0: > firmware ver SW_RM.1.1.1-00157-QCARMSWPZ-1 api 5 features > ignore-otp,no-4addr-pad crc32 10bf8e08 > Feb 13 01:39:36 darkstar kernel: [ 34.012291] ath10k_pci 0000:01:00.0: > board_file api 1 bmi_id N/A crc32 cdb586cf > Feb 13 01:39:36 darkstar kernel: [ 34.012301] ath10k_pci 0000:01:00.0: > htt-ver 3.1 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1 > Feb 13 01:39:36 darkstar kernel: [ 34.067918] ieee80211 phy0: Hardware > restart was requested > > Feb 13 01:39:36 darkstar kernel: [ 34.010318] ath10k_pci 0000:01:00.0: > firmware crashed! (uuid cb6fc88d-918d-4c7a-af69-15a713136bf7) > Feb 13 01:39:36 darkstar kernel: [ 34.014330] ath10k_pci 0000:01:00.0: > firmware register dump: > Feb 13 01:39:36 darkstar kernel: [ 34.014340] ath10k_pci 0000:01:00.0: > [00]: 0x05010000 0x00000000 0x0099987C 0x00000000 > Feb 13 01:39:36 darkstar kernel: [ 34.014349] ath10k_pci 0000:01:00.0: > [04]: 0x00000000 0x00000000 0x00000000 0x00000000
Does this patch fix it? ath10k: fix firmware assert in monitor mode https://patchwork.kernel.org/patch/8481281/ -- Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
