Hello everyone,
Now I am doing point to point throughput test using and ath10k. The
hardwares are clearfog A1 board with armada 388 and WLE900VX (QCA9880).
The OpenWRT trunk is running on it.
At first I did UDP throughput test ( WDS AP <---> WDS Client ) with
iperf3 server on the WDS AP. The throughput is approx 630 Mbps. But if
the server sends the data, the throughput will rise to 700 Mbps. I did
the bidirectional test for many times. The UDP data transferring from AP
side always has 70 - 80 Mbps more throughput.
In the same situation, I did UDP throughput test between PC and WDS AP (
PC <---->WDS Client <----> WDS AP ) . The PC is connected with the WDS
client via GbE port. I have found a more interesting result. The data
throughput is about 678 Mbps when the data is transmitted from AP to PC.
There is almost no performance loss. But the throughput is only about
425 Mpbs from PC to AP.
Can anyone give me some advises or some info about the reason and how to
improve the transmitting performance from PC to AP side. Thank you.
Regards,
Xue Liu
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
