Earlier when operating irq mode is legacy, interrupts are disabled
and re-enabled based on num_msi_intrs. commit cfe9011a05a8 ("ath10k:
remove MSI range support") replaced num_msi_intrs by oper_irq_mode.
Since oper_irq_mode is not initialized for ahb devices (i.e qca4019),
device boot up is failed during probe.
Fixes: cfe9011a05a8 ("ath10k: remove MSI range support")
Signed-off-by: Rajkumar Manoharan <[email protected]>
---
drivers/net/wireless/ath/ath10k/ahb.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/ahb.c
b/drivers/net/wireless/ath/ath10k/ahb.c
index bd62bc19e758..37ff36fca7bc 100644
--- a/drivers/net/wireless/ath/ath10k/ahb.c
+++ b/drivers/net/wireless/ath/ath10k/ahb.c
@@ -476,6 +476,7 @@ static irqreturn_t ath10k_ahb_interrupt_handler(int irq,
void *arg)
static int ath10k_ahb_request_irq_legacy(struct ath10k *ar)
{
+ struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
struct ath10k_ahb *ar_ahb = ath10k_ahb_priv(ar);
int ret;
@@ -487,6 +488,7 @@ static int ath10k_ahb_request_irq_legacy(struct ath10k *ar)
ar_ahb->irq, ret);
return ret;
}
+ ar_pci->oper_irq_mode = ATH10K_PCI_IRQ_LEGACY;
return 0;
}
--
2.8.3
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
