On 07/13/2016 07:10 AM, Iñaki Pascual wrote:
Hi everyone,
I am trying to get link quality information from an 802.11ac interface and it looks like
the only way is to use "iw wlan2 scan". I don't like this solution as
it scans all channels and takes a while.
If I try "cat /proc/net/wireless" (this would be my preferred option) the
output is empty and I am not able to get this information with any other tool. Below
is the output for some commands I tried.
I am using kernel 4.2 with ath10k and Candela firmware 10.1 on a Qualcomm
Atheros QCA988x
Any ideas on how can I get the link quality information?
Did you try:
iw dev wlan0 station dump
If you want tx rate reporting, you need to run my driver patches as well
as my firmware, but rx-rate should be reported with stock driver
(and stock firmware, for that matter)...
Thanks,
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
