"Valo, Kalle" <[email protected]> writes: > I was testing master-pending branch and saw these warnings when I was > reloading ath10k. I have seen this two times out of two tests so seems > to be easy to reproduce. I don't have time to investigate this more at > this time but I'll post this anyway. > > [ 256.946615] ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode > 0 reset_mode 0 > [ 257.135392] ath10k_pci 0000:02:00.0: qca988x hw2.0 target 0x4100016c > chip_id 0x043202ff sub 0000:0000 > [ 257.135397] ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 > dfs 0 testmode 1 > [ 257.135665] ath10k_pci 0000:02:00.0: firmware ver 10.2.4.70.54 api 5 > features no-p2p,raw-mode,mfp crc32 9d340dd9 > [ 257.193219] ath10k_pci 0000:02:00.0: board_file api 1 bmi_id N/A crc32 > bebc7c08 > [ 258.458099] ath10k_pci 0000:02:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp > max-sta 128 raw 0 hwcrypto 1 > [ 258.602274] ath: EEPROM regdomain: 0x0 > [ 258.602279] ath: EEPROM indicates default country code should be used > [ 258.602280] ath: doing EEPROM country->regdmn map search > [ 258.602283] ath: country maps to regdmn code: 0x3a > [ 258.602285] ath: Country alpha2 being used: US > [ 258.602287] ath: Regpair used: 0x3a > > [...] > > [ 277.244673] ------------[ cut here ]------------ > [ 277.244685] WARNING: CPU: 2 PID: 2162 at lib/debugobjects.c:263 > debug_print_object+0x85/0xa0 > [ 277.244707] ODEBUG: free active (active state 0) object type: timer_list > hint: ath10k_htt_rx_ring_refill_retry+0x0/0x10 [ath10k_core]
I bisected this to: [v2] ath10k: implement NAPI support https://patchwork.kernel.org/patch/9240975/ I'll reply to that patch for more info. -- Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
