On 09/15/2016 07:19 AM, Valo, Kalle wrote:
Ben Greear <[email protected]> writes:
On 09/14/2016 07:06 AM, Valo, Kalle wrote:
[email protected] writes:
From: Ben Greear <[email protected]>
Using debugfs. More convenient than module options
in some cases.
Signed-off-by: Ben Greear <[email protected]>
---
drivers/net/wireless/ath/ath10k/debug.c | 62 +++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/debug.c
b/drivers/net/wireless/ath/ath10k/debug.c
index e251155..d552a4a 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -870,6 +870,65 @@ static const struct file_operations fops_reg_addr = {
.llseek = default_llseek,
};
+static ssize_t ath10k_read_debug_level(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ int sz;
+ const char buf[] =
+ "To change debug level, set value adding up desired flags:\n"
+ "PCI: 0x1\n"
+ "WMI: 0x2\n"
+ "HTC: 0x4\n"
+ "HTT: 0x8\n"
+ "MAC: 0x10\n"
+ "BOOT: 0x20\n"
+ "PCI-DUMP: 0x40\n"
+ "HTT-DUMP: 0x80\n"
+ "MGMT: 0x100\n"
+ "DATA: 0x200\n"
+ "BMI: 0x400\n"
+ "REGULATORY: 0x800\n"
+ "TESTMODE: 0x1000\n"
+ "INFO-AS-DBG: 0x40000000\n"
+ "FW: 0x80000000\n"
+ "ALL: 0xFFFFFFFF\n";
+ char wbuf[sizeof(buf) + 60];
+ sz = snprintf(wbuf, sizeof(wbuf), "Current debug level: 0x%x\n\n%s",
+ ath10k_debug_mask, buf);
+ wbuf[sizeof(wbuf) - 1] = 0;
+
+ return simple_read_from_buffer(user_buf, count, ppos, wbuf, sz);
+}
+
+/* Set logging level.
+ */
+static ssize_t ath10k_write_debug_level(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct ath10k *ar = file->private_data;
+ int ret;
+ unsigned long mask;
+
+ ret = kstrtoul_from_user(user_buf, count, 0, &mask);
+ if (ret)
+ return ret;
+
+ ath10k_warn(ar, "Setting debug-mask to: 0x%lx old: 0x%x\n",
+ mask, ath10k_debug_mask);
+ ath10k_debug_mask = mask;
+ return count;
+}
There are already sysfs files for module parameters which seems to work
just fine for this case:
# echo 0xffffffff > /sys/module/ath10k_core/parameters/debug_mask
Ok, but it is still nice to have the printout info of what log levels
means. Otherwise, you have to go look at firmware source to even know how
to enable the proper flags. And as these flags are internal and might change,
we could change the printout text to match the specific kernel that is running.
The debug log levels are documented in the wiki:
https://wireless.wiki.kernel.org/en/users/drivers/ath10k/debug#debug_log_messages
And they are not supposed to change, there should be only additions.
Ahh, I remember the best part of this patch. It pre-positions for another patch
that makes the debug-mask per NIC instance instead of per driver.
This can be quite useful for testing with multiple radios, maybe only one of
which you want to see logging for.
And regardless of what is in a wiki somewhere, having a debugfs file to cat out
is
more user friendly.
Thanks,
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
