Hello,

I am running a Debian Jessie server on the backports kernel 4.7.0-0.bpo.1-amd64. An Ubiquiti SR71 with its AR928X is working just fine under ath9k.

The mikrotik R11e-5HacT with its QCA9880-BR4A is recognized after some errors trying to load inexistent files with the standard firmware-5.bin from the Jessie Backports (10.2.4.70.54): ...ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/pre-cal-pci-0000:02:00.0.bin (-2) ...ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:02:00.0.bin failed with error -2 ...ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/cal-pci-0000:02:00.0.bin (-2) ...ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/cal-pci-0000:02:00.0.bin failed with error -2 ...ath10k_pci 0000:02:00.0: firmware: failed to load ath10k/QCA988X/hw2.0/board-2.bin (-2) ...ath10k_pci 0000:02:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2 There are many reports on working devices with these errors on the web so I suppose they can be ignored.

The device seems to work (iw scan shows better results than the SR71), but after connection to the AP via wpa_supplicant, dhclient is unable to retrieve an IP-adress. I have tried the newer firmware (10.2.4.70.58) and the older ones as well as those from candela without success. On older firmwares additional errors up to firmware crash on iw set bitrates appear.


Regards,
Felix

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Reply via email to