On Dienstag, 17. Januar 2017 12:54:52 CET Sven Eckelmann wrote: > Hi, > > I've just tested LEDE-IPQ40XX [1] after the official open QSDK 1.1.3 [2] > was > not able to boot on an ap.dk01.1-c1-like device. This seemed to work > exceptionally well (the device basically worked after the first build) but I > got a little suspicious when looking at the code which it uses for getting the > wifi devices up and running. > > Spoiler: My actual questions are at the end of the mail. [...] > Questions > ========= > > Which therefore brings me back to the initial questions: > > * Is it known what was modified in the board data and why the board-2.bin > from ath10k/QSDK open don't "work"? At least there must be something > essential when each vendor ships completely different versions (according > to the LEDE-IPQ40xx package [3]). > * How were the board-2.bin files from Christian generated > (not the tool to generate the TLV sections of board-2.bin. But the input > files used for the actual board data sections). > * Is the QCA4019 ath10k board data + cal loading order really correct: > - load ART data as pre-cal-* to device > - execute BMI_PARAM_GET_EEPROM_BOARD_ID > - load correct board data from board-2.bin to device > - execute bmi_otp_exe_param
*bump* Kind regards, Sven
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k