On 09/12/2017 09:24 AM, Luka Karinja wrote:
On 09/12/2017 12:25 AM, Ryan Hsu wrote:
On 09/11/2017 03:03 PM, Luka Karinja wrote:
Hello. I'm trying to get a M.2 QCA6174 working on my MSI
B150Mortar motherboard. i did try all the various firmware
versions from https://github.com/kvalo/ath10k-firmware more or
less with the same errors as bellow
in dmesg i get: failed to fetch board data for
bus=pci,vendor=168c,device=003e,subsystem-vendor=0000,subsystem-device=0000
from ath10k/QCA6174/hw3.0/board-2.bin
when trying to get the device up i get: RTNETLINK answers:
Resource temporarily unavailable
[ 2026.219245] ath10k_pci 0000:05:00.0: pci irq msi oper_irq_mode
2 irq_mode 0 reset_mode 0
[ 2026.477510] ath10k_pci 0000:05:00.0: qca6174 hw3.2 target
0x05030000 chip_id 0x00340aff sub 0000:0000
[ 2026.477517] ath10k_pci 0000:05:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 0 testmode 0
[ 2026.478640] ath10k_pci 0000:05:00.0: firmware ver
WLAN.RM.4.4.1-00026-QCARMSWP-1 api 6 features
wowlan,ignore-otp,raw-mode crc32 7b90c3fc
[ 2026.542196] ath10k_pci 0000:05:00.0: failed to fetch board data
for
bus=pci,vendor=168c,device=003e,subsystem-vendor=0000,subsystem-device=0000
from ath10k/QCA6174/hw3.0/board-2.bin
Not sure what kernel and driver do you have?
This should already fix this case -
https://patchwork.kernel.org/patch/9486941/
I have kernel 4.12.10 (Arch linux) i did try with ath10k
WLAN.RM.2.4, 4.4, 4.4.1 firmware
ok, then it should be happening, would you mind enable the
ATH10K_DBG_BOOT and share logs?
https://wireless.wiki.kernel.org/en/users/drivers/ath10k/debug
here is the log with ATH10K_DBG_BOOT
BTW. that log is from kernel 4.13.1 and FW 4.4.1
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
