Sven's boarddata for the OpenMesh A42 has been accepted. \o/ So let's try to get the board data for the RT-AC58U merged.
On Friday, December 8, 2017 10:50:12 AM CET Kalle Valo wrote: > > I've attached the necessary bmi-board-id=16 and bmi-board-id=17 board > > files to this mail as well. So, all that needs to be done is to add > > them to the board-2.bin on your codeaurora / ath10k-firmware project. > > > > Kalle: Can you please update the board-2.bin for the IPQ40XX on your > > ath10k-firmware project on github? Since some time has passed since the original submission, I just stick to answering the questions in the the guide from: <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles> > description for what hardware this is The hardware is the ASUS RT-AC58U [0]. It has a IPQ4018 SoC which hosts two ath10k wifis. <https://www.asus.com/Networking/RT-AC58U/> It's based on the qcom-ipq4019-ap.dk01.1-c2. machid: 0x8010100 . the 5GHz and 2.4GHz radio components were drastically changed and as a result, the device's wifis don't work very well with the reference board-2.bin values. The 5GHz wifi suffers the most, the max throughput tops out at 6 Mbps, even in the best possible "lab conditions". > origin of the board file (did you create it yourself or where you downloaded) These files are available in ASUS's GPL Source Code release. The source code can be downloaded from this site: <https://www.asus.com/Networking/RT-AC58U/HelpDesk_Download/> Just select "Driver & Tools" in the right frame and "Others" in the "Please select OS". It's the second tab called "Source Code": |Version 3.0.0.4.380.8119 |2017/10/30 522.32 MBytes |GPL of ASUS RT-AC58U for firmware 3.0.0.4.380.8119 (Note: If you press "Show all", it will list two older releases as well. The boarddata files I sent you back then came from the original GPL_RT-AC58U_3.0.0.4.380.6516-g6772678 release. But the boarddata_*.bin files have been updated since. So I'm attaching the new ones this time.) The zip file contains one big GPL_RT-AC58U_3.0.0.4.380.8119-gdb642b4.tgz which in turn contain these these two files. asuswrt/release/src/router/qca-wifi-fw.ipq40xx/RT-AC58U/boarddata_0.bin asuswrt/release/src/router/qca-wifi-fw.ipq40xx/RT-AC58U/boarddata_1.bin I took the liberty of renaming the files to: boarddata_0 -> bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=ASUS-RT-AC58U.bin boarddata_1 -> bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=ASUS-RT-AC58U.bin > ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) Following OpenMesh A42 example of "VENDOR-DEVICE", I choose to go with: "ASUS-RT-AC58U" as the variant string: full board name (ATH10K_BD_IE_BOARD_NAME): bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=ASUS-RT-AC58U bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=ASUS-RT-AC58U { "data": "bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=ASUS-RT-AC58U.bin", "names": [ "bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=ASUS-RT-AC58U" ] }, { "data": "bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=ASUS-RT-AC58U.bin", "names": [ "bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=ASUS-RT-AC58U" ] }, (if this is appended at the end of board-2.json, please remove the last comma) > attach the actual board file (board.bin) attached. just in case. These are the sha256sum: d9eb177737983ed320027d50711fd17fadc8057ff0a99d1d455342ef7a7bb1af \ bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=ASUS-RT-AC58U.bin 24969cd91553fd915c51a8fe51c7b7e0e273679e1349b47d0a6c5ef4b4bb4a1b \ bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=ASUS-RT-AC58U.bin I also verified that the ASUS' firmware for the RT-AC58U (FW_RT_AC58U_30043808119.ZIP) uses the very same files.
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=ASUS-RT-AC58U.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=ASUS-RT-AC58U.bin
Description: Binary data
_______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
