On 2018-04-13 04:59, Brian Norris wrote:
Hi Carl,

On Fri, Mar 30, 2018 at 11:14:00AM +0800, Carl Huang wrote:
The ath10k reports the random_mac_addr capability to upper layer
based on the service bit firmware reported. Driver sets the
spoofed flag in scan_ctrl_flag to firmware if upper layer has
enabled this feature in scan request.

Test with QCA6174 hw3.0 and firmware-6.bin_WLAN.RM.4.4.1-00102-QCARMSWP-1,
but QCA9377 is also affected.

Signed-off-by: Carl Huang <cjhu...@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/mac.c     | 17 +++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-ops.h | 22 ++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi-tlv.c | 25 +++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/wmi-tlv.h | 11 +++++++++++
 drivers/net/wireless/ath/ath10k/wmi.c     |  5 +++++
 drivers/net/wireless/ath/ath10k/wmi.h     |  9 +++++++++
 6 files changed, 89 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index ebb3f1b..c5cd5e5 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5699,6 +5699,12 @@ static int ath10k_hw_scan(struct ieee80211_hw *hw,
                arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE;
        }

+       if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) {
+               arg.scan_ctrl_flags |=  WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ;
+               ether_addr_copy(arg.mac_addr.addr, req->mac_addr);
+               ether_addr_copy(arg.mac_mask.addr, req->mac_addr_mask);
+       }
+
        if (req->n_channels) {
                arg.n_channels = req->n_channels;
                for (i = 0; i < arg.n_channels; i++)
@@ -8397,6 +8403,17 @@ int ath10k_mac_register(struct ath10k *ar)
                goto err_dfs_detector_exit;
        }

+       if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) {
+               ret = ath10k_wmi_scan_prob_req_oui(ar, ar->mac_addr);
+               if (ret) {
+                       ath10k_err(ar, "failed to set prob req oui: %i\n", ret);
+                       goto err_dfs_detector_exit;
+               }
+
+               ar->hw->wiphy->features |=
+                       NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;

Do you support NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR too?

I'll add this flag too.


+       }
+


Brian

_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

Reply via email to