Sven Eckelmann <[email protected]> writes: > The support for this device was added a while ago to OpenWrt. This AP > requires > two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board- > id='s would clash with one of the the IPQ401X AP-DK boards because QCA > doesn't > provide special IDs for customers and seems to use the AP-DK board-ids in the > wifi firmware to change its behavior. > > Now to the questions from the wiki page [1]: > > * description for what hardware this is: > > - it is a QCA401x based board (most likely on qcom-ipq4019-ap.dk01.1) > - one QCA40xx radio is used as 2.4GHz radio > - one QCA40xx radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > > - Christian didn't include this info in the OpenWrt commit (maybe he can add > it here) > - most likely taken from stock firmware image > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - QCA4019 hw1.0 > > + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=AVM-FRITZBox-4040 > sha256sum: > eb866d036149fe4ba35f3f9d0d97e51969b1f1dbac6ea962daf9012ffa75427a > + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=AVM-FRITZBox-4040 > sha256sum: > f3dc3c2f10037722006e9e7e5173a7468649e9a554f564323f9580f4a8bba10a > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin")
Added, please check the results: https://github.com/kvalo/ath10k-firmware/commit/81a745e6a529565438ee4aea357a8a59e9564848 New: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=AVM-FRITZBox-4040 Changed: Deleted: 1 board image(s) added, 0 changed, 0 deleted, 17 in total New: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=AVM-FRITZBox-4040 Changed: Deleted: 1 board image(s) added, 0 changed, 0 deleted, 18 in total -- Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
