Hi, Is it ok to run a QCA9880 with skip_otp=1? It's working fine with skip_ota, but just want to confirm this is safe.
without skip_otp, mine isn't coming up because of "failed to run otp: -22" [ 9.287905] PCI: Enabling device 0000:00:00.0 (0000 -> 0002) [ 9.293912] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0 [ 9.568820] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:00:00.0.bin failed with error -2 [ 9.579896] ath10k_pci 0000:00:00.0: Falling back to user helper [ 9.737064] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed [ 9.746618] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/cal-pci-0000:00:00.0.bin failed with error -2 [ 9.757342] ath10k_pci 0000:00:00.0: Falling back to user helper [ 9.909261] firmware ath10k!cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed [ 9.918500] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/firmware-6.bin failed with error -2 [ 9.929582] ath10k_pci 0000:00:00.0: Falling back to user helper [ 10.059370] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed [ 10.073667] ath10k_pci 0000:00:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000 [ 10.083242] ath10k_pci 0000:00:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 1 [ 10.096229] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00033 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 c41417d0 [ 10.189809] ath10k_pci 0000:00:00.0: Direct firmware load for ath10k/QCA988X/hw2.0/board-2.bin failed with error -2 [ 10.200640] ath10k_pci 0000:00:00.0: Falling back to user helper [ 10.271745] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed [ 10.299633] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 [ 10.437761] ath10k_pci 0000:00:00.0: otp calibration failed: 2 [ 10.443792] ath10k_pci 0000:00:00.0: failed to run otp: -22 [ 10.449551] ath10k_pci 0000:00:00.0: could not init core (-22) [ 10.455680] ath10k_pci 0000:00:00.0: could not probe fw (-22) _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k