Hi Sebastian, Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on ath6kl/ath-next] [also build test WARNING on v4.17-rc2 next-20180426] [if your patch is applied to the wrong git tree, please drop us a note to help improve the system] url: https://github.com/0day-ci/linux/commits/s-gottschall-dd-wrt-com/ath10k-fix-crash-in-recent-3-5-3-9984-firmware-due-wrong-handling-of-peer_bw_rxnss_override-parameter/20180427-234051 base: https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath-next config: i386-allmodconfig (attached as .config) compiler: gcc-7 (Debian 7.3.0-16) 7.3.0 reproduce: # save the attached .config to linux build tree make ARCH=i386 All warnings (new ones prefixed by >>): drivers/net/wireless/ath/ath10k/mac.c: In function 'ath10k_peer_assoc_h_vht': >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11A' not handled in switch [-Wswitch] switch(arg->peer_phymode) { ^~~~~~ >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11G' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11B' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11GONLY' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11NA_HT20' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11NG_HT20' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11NA_HT40' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11NG_HT40' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11AC_VHT20' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11AC_VHT40' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11AC_VHT80' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11AC_VHT20_2G' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11AC_VHT40_2G' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_11AC_VHT80_2G' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_UNKNOWN' not handled in switch [-Wswitch] >> drivers/net/wireless/ath/ath10k/mac.c:2534:3: warning: enumeration value >> 'MODE_MAX' not handled in switch [-Wswitch] vim +/MODE_11A +2534 drivers/net/wireless/ath/ath10k/mac.c 2457 2458 static void ath10k_peer_assoc_h_vht(struct ath10k *ar, 2459 struct ieee80211_vif *vif, 2460 struct ieee80211_sta *sta, 2461 struct wmi_peer_assoc_complete_arg *arg) 2462 { 2463 const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; 2464 struct ath10k_vif *arvif = (void *)vif->drv_priv; 2465 struct cfg80211_chan_def def; 2466 enum nl80211_band band; 2467 const u16 *vht_mcs_mask; 2468 u8 ampdu_factor; 2469 u8 max_nss, vht_mcs; 2470 int i; 2471 2472 if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) 2473 return; 2474 2475 if (!vht_cap->vht_supported) 2476 return; 2477 2478 band = def.chan->band; 2479 vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs; 2480 2481 if (ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) 2482 return; 2483 2484 arg->peer_flags |= ar->wmi.peer_flags->vht; 2485 2486 if (def.chan->band == NL80211_BAND_2GHZ) 2487 arg->peer_flags |= ar->wmi.peer_flags->vht_2g; 2488 2489 arg->peer_vht_caps = vht_cap->cap; 2490 2491 ampdu_factor = (vht_cap->cap & 2492 IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >> 2493 IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; 2494 2495 /* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to 2496 * zero in VHT IE. Using it would result in degraded throughput. 2497 * arg->peer_max_mpdu at this point contains HT max_mpdu so keep 2498 * it if VHT max_mpdu is smaller. 2499 */ 2500 arg->peer_max_mpdu = max(arg->peer_max_mpdu, 2501 (1U << (IEEE80211_HT_MAX_AMPDU_FACTOR + 2502 ampdu_factor)) - 1); 2503 2504 if (sta->bandwidth == IEEE80211_STA_RX_BW_80) 2505 arg->peer_flags |= ar->wmi.peer_flags->bw80; 2506 2507 if (sta->bandwidth == IEEE80211_STA_RX_BW_160) 2508 arg->peer_flags |= ar->wmi.peer_flags->bw160; 2509 2510 /* Calculate peer NSS capability from VHT capabilities if STA 2511 * supports VHT. 2512 */ 2513 for (i = 0, max_nss = 0, vht_mcs = 0; i < NL80211_VHT_NSS_MAX; i++) { 2514 vht_mcs = __le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map) >> 2515 (2 * i) & 3; 2516 2517 if ((vht_mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED) && 2518 vht_mcs_mask[i]) 2519 max_nss = i + 1; 2520 } 2521 arg->peer_num_spatial_streams = min(sta->rx_nss, max_nss); 2522 arg->peer_vht_rates.rx_max_rate = 2523 __le16_to_cpu(vht_cap->vht_mcs.rx_highest); 2524 arg->peer_vht_rates.rx_mcs_set = 2525 __le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map); 2526 arg->peer_vht_rates.tx_max_rate = 2527 __le16_to_cpu(vht_cap->vht_mcs.tx_highest); 2528 arg->peer_vht_rates.tx_mcs_set = ath10k_peer_assoc_h_vht_limit( 2529 __le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map), vht_mcs_mask); 2530 arg->peer_bw_rxnss_override = 0; 2531 2532 if (arg->peer_num_spatial_streams) { 2533 /* in case if peer is connected with vht160 or vht80+80, we need to properly adjust rxnss parameters */ > 2534 switch(arg->peer_phymode) { 2535 case MODE_11AC_VHT80_80: 2536 arg->peer_bw_rxnss_override = BW_NSS_FWCONF_80_80(arg->peer_num_spatial_streams); 2537 /* fall through */ 2538 case MODE_11AC_VHT160: 2539 arg->peer_bw_rxnss_override |= BW_NSS_FWCONF_160(arg->peer_num_spatial_streams); 2540 break; 2541 } 2542 } 2543 2544 /* in case peer has no nss properties for some reasons, we set local nss to minimum (1x1) to avoid a 2545 * firmware assert / crash. this applies only to VHT160 or VHT80+80 and is a WAR for clients breaking 2546 * the spec. 2547 */ 2548 2549 if (!arg->peer_num_spatial_streams && (arg->peer_phymode == MODE_11AC_VHT80_80 || arg->peer_phymode == MODE_11AC_VHT160)) { 2550 arg->peer_bw_rxnss_override = BW_NSS_FWCONF_MAP_ENABLE; 2551 } 2552 2553 ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n", 2554 sta->addr, arg->peer_max_mpdu, arg->peer_flags); 2555 } 2556 --- 0-DAY kernel test infrastructure Open Source Technology Center https://lists.01.org/pipermail/kbuild-all Intel Corporation
.config.gz
Description: application/gzip
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
