Tri-band devices (1x 2.4GHz + 2x 5GHz) often incorporate special filters in the RX and TX path. These filtered channel can in theory still be used by the hardware but the signal strength is reduced so much that it makes no sense.
There is already a DT property to limit the available channels but ath10k has to manually call this functionality to limit the currrently set wiphy channels further. Signed-off-by: Sven Eckelmann <[email protected]> --- drivers/net/wireless/ath/ath10k/mac.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 95243b48a179..8ed37ffd320f 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -18,6 +18,7 @@ #include "mac.h" +#include <net/cfg80211.h> #include <net/mac80211.h> #include <linux/etherdevice.h> #include <linux/acpi.h> @@ -8306,6 +8307,7 @@ int ath10k_mac_register(struct ath10k *ar) ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band; } + wiphy_read_of_freq_limits(ar->hw->wiphy); ath10k_mac_setup_ht_vht_cap(ar); ar->hw->wiphy->interface_modes = -- 2.11.0 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
