On 08/06/2018 07:08 PM, Brian Norris wrote:
Hi all, I'm looking at ancient changes like this: commit 5572a95b4b5768187652a346356e39e7542ca6e0 Author: Ben Greear <[email protected]> Date: Mon Nov 24 16:22:10 2014 +0200 ath10k: apply chainmask settings to vdev on creation since I see that some firmwares seem to crash a lot if you apply certain chainmask settings (e.g., 0x2). Is it really expected that you can set gaps in the chainmask or not? I ask because I've been trying to use this for doing some antenna configuration verification (e.g., disable all but one antenna and see what happens), and this works as expected on APs I have running IPQ8064 (QCA988X?), but it crashes the firmware on IPQ4019.
I don't think you can even directly set the chainmask in the firmware, and from my previous looking at the firmware, it is not designed to support gaps. If you want to determine if an antenna is working, you can look at the per-chain RSSI stats when receiving frames using all available antenna (ie, 3x3 rates for a 3x3 NIC). Thanks, Ben -- Ben Greear <[email protected]> Candela Technologies Inc http://www.candelatech.com _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
