Hi, This is a set of board.bin files for the ASUS Lyra MAP-AC2200 Router [0], which I wish to be added to the ath10k-firmware repository. As per the current "Submitting board files" guidelines [1]:
* description for what hardware this is:
- it is a IPQ4019 based board [0]
- one QCA40xx radio is used as 2.4GHz radio
- one QCA40xx radio is used as 5GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- All files were extracted from official vendor firmware which was on the
device from the factory
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- qca4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=ASUS-MAP-AC2200
+ bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=ASUS-MAP-AC2200
* sha256sum of each new board file to add
- 87f35885afcb94baa30440f257e5854e5475e7516ca1fdea192f945f914b0395
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=ASUS-MAP-AC2200.bin
- 15a3b3afbdf24b560618f10ff58f0c78cdff757cb4a61c59b2e1ff771499d51f
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=ASUS-MAP-AC2200.bin
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
Marius Genheimer
[0] <https://wikidevi.com/wiki/ASUS_Lyra>
[1] <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=ASUS-MAP-AC2200.bin
Description: Binary data
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=ASUS-MAP-AC2200.bin
Description: Binary data
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
