Rakesh Pillai <[email protected]> wrote: > The support to put WCN3990 firmware into Factory > test mode is not present currently. The WCN3990 > firmware can operate in Factory test mode based > on the mode it receives in the wlan enable message > from the host driver. > > When the host driver is started in testmode send > the operating mode as UTF mode, to the WCN3990 > firmware, in the wlan enable message to start the > firmware in Factory test mode. > > Tested on: WCN3990 > Tested FW: WLAN.HL.2.0-01192-QCAHLSWMTPLZ-1. > > Signed-off-by: Rakesh Pillai <[email protected]> > Reviewed-by: Brian Norris <[email protected]> > Signed-off-by: Kalle Valo <[email protected]>
I was able to apply with 3-way merge but please double check the results: https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git/commit/?h=pending&id=ef562f95826f412c14f59ca916ff55931bed0813 Applying: ath10k: Enable Factory Test Mode for WCN3990 Using index info to reconstruct a base tree... M drivers/net/wireless/ath/ath10k/ahb.c M drivers/net/wireless/ath/ath10k/core.c M drivers/net/wireless/ath/ath10k/hif.h M drivers/net/wireless/ath/ath10k/mac.c M drivers/net/wireless/ath/ath10k/pci.c M drivers/net/wireless/ath/ath10k/sdio.c M drivers/net/wireless/ath/ath10k/snoc.c M drivers/net/wireless/ath/ath10k/usb.c Falling back to patching base and 3-way merge... Auto-merging drivers/net/wireless/ath/ath10k/usb.c Auto-merging drivers/net/wireless/ath/ath10k/snoc.c Auto-merging drivers/net/wireless/ath/ath10k/sdio.c Auto-merging drivers/net/wireless/ath/ath10k/pci.c Auto-merging drivers/net/wireless/ath/ath10k/mac.c Auto-merging drivers/net/wireless/ath/ath10k/hif.h Auto-merging drivers/net/wireless/ath/ath10k/core.c Auto-merging drivers/net/wireless/ath/ath10k/ahb.c -- https://patchwork.kernel.org/patch/10579559/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
