Manikanta Pubbisetty <mpubb...@codeaurora.org> wrote: > Multicast/broadcast traffic destined for a particular vlan group will > always be encrypted in software. To enable dynamic VLANs, it requires > driver support for sending software encrypted packets. > > In ath10k, sending software encrypted frames is allowed only when we insmod > the driver with cryptmode param set to 1, this configuration disables > hardware crypto and enables RAW mode implicitly. Since, enabling raw > mode has performance impact, this cannot be considered as an ideal > solution for supporting VLANs in the driver. > > As an alternative take, in this approach, cryptographic keys for > unicast traffic (per peer PTKs) and keys for non-vlan group traffic > will be configured in hardware, allowing hardware encryption for unicast > and non-vlan group traffic. Only vlan group traffic will be encrypted in > software and pushed to the target with encap mode set to RAW in the TX > descriptors. > > Not all firmwares can support this type of key configuration(having few > keys installed in hardware and few only in software); for this purpose a > new WMI service flag "WMI_SERVICE_PER_PACKET_SW_ENCRYPT" is introduced to > advertise this support. > > Also, adding the logic required to send sw encrypted frames in raw mode. > > Hardwares Tested : QCA9984, QCA988X > Firmwares Tested : 10.4-3.5.3-00057, 10.2.4-1.0-00042 > > Signed-off-by: Manikanta Pubbisetty <mpubb...@codeaurora.org> > Signed-off-by: Kalle Valo <kv...@codeaurora.org>
Patch applied to ath-next branch of ath.git, thanks. 4920ce3bf7e0 ath10k: add dynamic vlan support -- https://patchwork.kernel.org/patch/10692385/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
