WCN3990 firmware versions WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 & onwards
supports maximum 33 peers including self peer. To support maximum peers,
send updated peer param to firmware during initialization.
Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1
Signed-off-by: Abhishek Ambure <aamb...@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/core.c | 6 +++---
drivers/net/wireless/ath/ath10k/hw.h | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c
b/drivers/net/wireless/ath/ath10k/core.c
index a1b2aea..336c6a4 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -560,10 +560,10 @@
.sw_decrypt_mcast_mgmt = true,
.hw_ops = &wcn3990_ops,
.decap_align_bytes = 1,
- .num_peers = TARGET_HL_10_TLV_NUM_PEERS,
+ .num_peers = TARGET_HL_TLV_NUM_PEERS,
.n_cipher_suites = 11,
- .ast_skid_limit = TARGET_HL_10_TLV_AST_SKID_LIMIT,
- .num_wds_entries = TARGET_HL_10_TLV_NUM_WDS_ENTRIES,
+ .ast_skid_limit = TARGET_HL_TLV_AST_SKID_LIMIT,
+ .num_wds_entries = TARGET_HL_TLV_NUM_WDS_ENTRIES,
.target_64bit = true,
.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL_DUAL_MAC,
.per_ce_irq = true,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h
b/drivers/net/wireless/ath/ath10k/hw.h
index fe6b2ed..67413ae 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -763,9 +763,9 @@ struct ath10k_hw_ops {
#define TARGET_TLV_MGMT_NUM_MSDU_DESC (50)
/* Target specific defines for WMI-HL-1.0 firmware */
-#define TARGET_HL_10_TLV_NUM_PEERS 14
-#define TARGET_HL_10_TLV_AST_SKID_LIMIT 6
-#define TARGET_HL_10_TLV_NUM_WDS_ENTRIES 2
+#define TARGET_HL_TLV_NUM_PEERS 33
+#define TARGET_HL_TLV_AST_SKID_LIMIT 16
+#define TARGET_HL_TLV_NUM_WDS_ENTRIES 2
/* Diagnostic Window */
#define CE_DIAG_PIPE 7
--
1.9.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
