From: Sven Eckelmann <seckelm...@datto.com>
ath10k_bss_info_changed() handles various events from the upper layers. It
parses the changed bitfield and then configures the driver/firmware
accordingly. Each detected event is handled in a separate scope which is
independent of each other - but in the same function.
The commit f279294e9ee2 ("ath10k: add support for configuring management
packet rate") changed this behavior by returning from this function
prematurely when some precondition was not fulfilled. All new event
handlers added after the BSS_CHANGED_BASIC_RATES event handler would then
also be skipped.
Signed-off-by: Sven Eckelmann <seckelm...@datto.com>
---
Cc: Kalle Valo <kv...@codeaurora.org>
Cc: Sriram R <srirr...@codeaurora.org>
Only compile tested
---
drivers/net/wireless/ath/ath10k/mac.c | 64 ++++++++++++++++-----------
1 file changed, 38 insertions(+), 26 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c
b/drivers/net/wireless/ath/ath10k/mac.c
index b73c23d4ce86..b1d0741c7861 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5578,6 +5578,40 @@ static void ath10k_configure_filter(struct ieee80211_hw
*hw,
mutex_unlock(&ar->conf_mutex);
}
+static void ath10k_recalculate_mgmt_rate(struct ath10k *ar,
+ struct ieee80211_vif *vif)
+{
+ struct ath10k_vif *arvif = (void *)vif->drv_priv;
+ const struct ieee80211_supported_band *sband;
+ struct cfg80211_chan_def def;
+ u8 basic_rate_idx;
+ int hw_rate_code;
+ u32 vdev_param;
+ u16 bitrate;
+ int ret;
+
+ lockdep_assert_held(&ar->conf_mutex);
+
+ if (WARN_ON(ath10k_mac_vif_chan(vif, &def)))
+ return;
+
+ sband = ar->hw->wiphy->bands[def.chan->band];
+ basic_rate_idx = ffs(vif->bss_conf.basic_rates) - 1;
+ bitrate = sband->bitrates[basic_rate_idx].bitrate;
+
+ hw_rate_code = ath10k_mac_get_rate_hw_value(bitrate);
+ if (hw_rate_code < 0) {
+ ath10k_warn(ar, "bitrate not supported %d\n", bitrate);
+ return;
+ }
+
+ vdev_param = ar->wmi.vdev_param->mgmt_rate;
+ ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
+ hw_rate_code);
+ if (ret)
+ ath10k_warn(ar, "failed to set mgmt tx rate %d\n", ret);
+}
+
static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *info,
@@ -5588,10 +5622,9 @@ static void ath10k_bss_info_changed(struct ieee80211_hw
*hw,
struct cfg80211_chan_def def;
u32 vdev_param, pdev_param, slottime, preamble;
u16 bitrate, hw_value;
- u8 rate, basic_rate_idx;
- int rateidx, ret = 0, hw_rate_code;
+ u8 rate;
+ int rateidx, ret = 0;
enum nl80211_band band;
- const struct ieee80211_supported_band *sband;
mutex_lock(&ar->conf_mutex);
@@ -5811,29 +5844,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw
*hw,
arvif->vdev_id, ret);
}
- if (changed & BSS_CHANGED_BASIC_RATES) {
- if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) {
- mutex_unlock(&ar->conf_mutex);
- return;
- }
-
- sband = ar->hw->wiphy->bands[def.chan->band];
- basic_rate_idx = ffs(vif->bss_conf.basic_rates) - 1;
- bitrate = sband->bitrates[basic_rate_idx].bitrate;
-
- hw_rate_code = ath10k_mac_get_rate_hw_value(bitrate);
- if (hw_rate_code < 0) {
- ath10k_warn(ar, "bitrate not supported %d\n", bitrate);
- mutex_unlock(&ar->conf_mutex);
- return;
- }
-
- vdev_param = ar->wmi.vdev_param->mgmt_rate;
- ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param,
- hw_rate_code);
- if (ret)
- ath10k_warn(ar, "failed to set mgmt tx rate %d\n", ret);
- }
+ if (changed & BSS_CHANGED_BASIC_RATES)
+ ath10k_recalculate_mgmt_rate(ar, vif);
mutex_unlock(&ar->conf_mutex);
}
--
2.20.1
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
