Hi, I am currently working on the Netgear Orbi Prok SRK60 support for OpenWrt. This AP requires three special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior.
This update improves stability and performance.
Now to the questions from the wiki page [1]:
* description for what hardware this is:
- it is a QCA4019 based module (based on qcom-ipq4019-ap.dk04.1-c1)
- one QCA4019 radio is used as 2.4GHz radio
- one QCA4019 radio is used as 5GHz radio
- an additional QCA9984 5GHz radio is attached via PCI
* origin of the board file (did you create it yourself or where you
downloaded)
- it was pulled from the factory firmware image
- it is based on latest 2.3.0.0 firmware
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Netgear-Orbi-Pro-SRK60
md5sum:
28eee902927c105f4ce259e3e5b187f3
+ bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Netgear-Orbi-Pro-SRK60
md5sum:
195fddececf3c50cf83bc48df3c1b1c7
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
Robert Marko
[1] https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles
bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Netgear-Orbi-Pro-SRK60.bin
Description: application/sega-cd-rom
bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Netgear-Orbi-Pro-SRK60.bin
Description: application/sega-cd-rom
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
