We are developing a product using split mac to distribute a WiFi network over several different access points. The implementation forwards the encrypted 802.11 frames over the ethernet to a gateway where the 802.11 network is terminated (no enctyption keys for the 802.11 network are available in the access point). For this to work, we use monitor mode and frame injection to receive and send frames to the driver in a modified OpenWrt firmware. This works fine on ath9k, and on ath10k wave 1 chipsets (e.g. Archer C7 with firmware QCA988X ver 10.2.4-1.0-00041, rawmode=1).
However, using ath10k wave 2 chipsets injecting encrypted frames on a monitor interface does not work, they are silently dropped by the firmware. I have not been able to locate any firmware supporting rawmode which I believe would allow this. Does any way of injecting encrypted frames currently exist on ath10k for wave 2 chipsets? Thanks for any help /Fredrik -- Fredrik Olofsson, M.Sc. Senior Engineer | E [email protected] _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
