On 4/26/19 5:58 AM, Venkateswara Naralasetty wrote:
ath10k_dbg() is called in ath10k_process_rx() with huge set of arguments
which is causing CPU overhead even when debug_mask is not set.
Good improvement was observed in the receive side performance when call
to ath10k_dbg() is avoided in the RX path.
Since currently all debug messages are sent via tracing infrastructure,
we cannot entirely avoid calling ath10k_dbg. Therefore, call to
ath10k_dbg() is made conditional based on tracing config in the driver.
Trasmit performance remains unchanged with this patch; below are some
experimental results with this patch and tracing disabled.
mesh mode:
w/o this patch with this patch
Traffic TP CPU Usage TP CPU usage
TCP 840Mbps 76.53% 960Mbps 78.14%
UDP 1030Mbps 74.58% 1132Mbps 74.31%
Infra mode:
w/o this patch with this patch
Traffic TP CPU Usage TP CPU usage
TCP Rx 1241Mbps 80.89% 1270Mbps 73.50%
UDP Rx 1433Mbps 81.77% 1472Mbps 72.80%
Tested platform : IPQ8064
hardware used : QCA9984
firmware ver : ver 10.4-3.5.3-00057
Signed-off-by: Kan Yan <[email protected]>
Signed-off-by: Venkateswara Naralasetty <[email protected]>
---
v2:
* changed trace enabled check from IS_ENABLED(CONFIG_ATH10K_TRACING)
* to trace_ath10k_log_dbg_enabled().
drivers/net/wireless/ath/ath10k/core.c | 2 ++
drivers/net/wireless/ath/ath10k/debug.c | 8 ++++----
drivers/net/wireless/ath/ath10k/debug.h | 22 ++++++++++++++++------
drivers/net/wireless/ath/ath10k/trace.c | 1 +
drivers/net/wireless/ath/ath10k/trace.h | 6 +++++-
5 files changed, 28 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.c
b/drivers/net/wireless/ath/ath10k/core.c
index cfd7bb2..ab709bf 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -26,6 +26,8 @@
#include "coredump.h"
unsigned int ath10k_debug_mask;
+EXPORT_SYMBOL(ath10k_debug_mask);
+
static unsigned int ath10k_cryptmode_param;
static bool uart_print;
static bool skip_otp;
diff --git a/drivers/net/wireless/ath/ath10k/debug.c
b/drivers/net/wireless/ath/ath10k/debug.c
index 32d967a..1b63929 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -2620,8 +2620,8 @@ void ath10k_debug_unregister(struct ath10k *ar)
#endif /* CONFIG_ATH10K_DEBUGFS */
#ifdef CONFIG_ATH10K_DEBUG
-void ath10k_dbg(struct ath10k *ar, enum ath10k_debug_mask mask,
- const char *fmt, ...)
+void __ath10k_dbg(struct ath10k *ar, enum ath10k_debug_mask mask,
+ const char *fmt, ...)
{
struct va_format vaf;
va_list args;
Do you still need the check later in this method:
if (ath10k_debug_mask & mask)
since you already checked in the ath10k_dbg() macro?
Thanks,
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
