Balaji Pothunoori <[email protected]> wrote: > This patch will add the support to control the transmit power for traffic > to a station associated with the AP. > > Underlying firmware will enforce that the maximum tx power will be based > on the regulatory requirements. If the user given transmit power is greater > than the allowed tx power in the given channel, then the firmware will use > the maximum tx power in the same channel. > > Max and Min tx power values will depends on no of tx chain masks, > for QCA9984 allowed tx power range values from 6 to 23. > > When 0 is sent to the firmware as tx power, it will revert to the default > tx power for the station. > > Tested Hardware : QCA9984 > Tested Firmware : 10.4-3.9.0.2-00046 > > Co-developed-by: Balaji Pothunoori <[email protected]> > Signed-off-by: Ashok Raj Nagarajan <[email protected]> > Signed-off-by: Balaji Pothunoori <[email protected]> > Signed-off-by: Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks. 33410a51468f ath10k: add support for controlling tx power to a station -- https://patchwork.kernel.org/patch/10968517/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
