Oever González <[email protected]> writes: > This is an update to the BDFs sent for the Linksys EA6350v3 device. After > testing all files from the original firmware, the following files gave > the best results. > > This update contains: > > * original files from the OEM firmware known to be the best for the device > > > Now to the questions from the wiki page [1]: > > * description for what hardware this is: > > - it is a IPQ4018 based board (AP-DK01.1-C2) > - one QCA40xx radio is used as 2.4GHz radio > - one QCA40xx radio is used as 5GHz radio > > * origin of the board file (did you create it yourself or where you > downloaded) > > - The board file(s) where extracted from the Linksys firmware. From > the image, there are a total of 8 folders: AH, AP, AU, EU, FCC, > hw_1, IC and PH. > - The files in this email are: > * hw_1/boardData_1_0_IPQ4019_Y9803_wifi0.bin > * IC/boardData_1_0_IPQ4019_Y9803_wifi1.bin > > * ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) > > - QCA4019 hw1.0 > > + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=linksys-ea6350v3 > md5sum: > 652522a532b0f1e69d0dc87f4ef6729c > sha256sum: > 6c0ab0e4158adf9e6b08a8623c8b59dfbb9219234745edbfa1712afee228f1ba > + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=linksys-ea6350v3 > md5sum: > ea718677188e968475c7955002f09362 > sha256sum: > 44f08d164cf35242cac0dc79be985db694ff26d8f934625b8c070d0218bff0f3 > > * attach the actual board file (board.bin) > > - The name of the files are equal to the id string in the board-2.bin > (minus the ".bin")
Thanks, added to QCA4019/hw1.0/board-2.bin: New: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=linksys-ea6350v3 bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=linksys-ea6350v3 Changed: Deleted: 2 board image(s) added, 0 changed, 0 deleted, 46 in total https://github.com/kvalo/ath10k-firmware/commit/848552f7e7606ae5cb20be96b77213defd414e6b -- Kalle Valo _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
