Hi,
Our motherboard has been modified once, and the latest baord file is
attached.
For the questions from the wiki page:
* description for what hardware this is:
- it is a IPQ4018 based board (AP-DK07-C1)
- one QCA40xx radio is used as 2.4/5 GHz radio
- one QCA40xx radio is used as 5GHz radio
* origin of the board file (did you create it yourself or where you
downloaded)
- The board file(s) where extracted from the Qxwlan firmware.
- The files in this email are:
* board_wifi0_2g.bin
* board_wifi0_5g.bin
* board_wifi1_5g.bin
* ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k)
- QCA4019 hw1.0
+ bus=ahb,bmi-chip-id=0,bmi-board-id=28,variant=Qxwlan-E2600AC
sha256sum:
4b52db2fb7e722c16d488dc7cf62ecc52371164e9cb616b0b68281913efba059
+ bus=ahb,bmi-chip-id=0,bmi-board-id=29,variant=Qxwlan-E2600AC
sha256sum:
383b1656efe710a35d01302135d32313678ec3fccadadb837c23fa8d9c956b9b
+ bus=ahb,bmi-chip-id=0,bmi-board-id=30,variant=Qxwlan-E2600AC
sha256sum:
b3e291f9dd246d03c114aad807d242dafae72693eac009055aafe64a29f05660
* attach the actual board file (board.bin)
- The name of the files are equal to the id string in the board-2.bin
(minus the ".bin")
Kind regards,
????
board_wifi0_2g.bin
Description: Binary data
board_wifi0_5g.bin
Description: Binary data
board_wifi1_5g.bin
Description: Binary data
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
