Hi, The support for this device was added a while ago to OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-id='s would clash with one of the the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior.
Now to the questions from the wiki page [1]: l description for what hardware this is: - it is a IPQ4018 based board - one QCA40xx radio is used as 2.4GHz radio - one QCA40xx radio is used as 5GHz radio l origin of the board file (did you create it yourself or where you downloaded) - taken from stock firmware image l ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) - QCA4019 hw1.0 md5sum of each new board file to add + bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMD1' md5sum: da14e0efd0b408685a0e5aa83227d460 + bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EMD1' md5sum: 685aa42c29ac39248ca75b748d8f9e18 Sincerely, Frank Shen Engineer Research and Development Senao Networks, Inc. Tel: +886-3-3289289 ext. 2697 Fax: +886-3-3961112
bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMD1.bin
Description: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-EMD1.bin
bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EMD1.bin
Description: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-EMD1.bin
_______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
