Hi, The support for this device was added a while ago to OpenWrt. This AP requires two special BDFs to get the Wi-Fi PHYs working (correctly). The bmi-board-id='s would clash with one of the IPQ401X AP-DK boards because QCA doesn't provide special IDs for customers and seems to use the AP-DK board-ids in the wifi firmware to change its behavior.
Now to the questions from the wiki page [1]: l description for what hardware this is: - It is an IPQ4018 based board. - One QCA40xx radio is used as 2.4GHz radio - One QCA40xx radio is used as 5GHz radio l origin of the board file (did you create it yourself or where you downloaded) - Taken from stock firmware image l ids to be used with the board file (ATH10K_BD_IE_BOARD_NAME in ath10k) - QCA4019 hw1.0 a7bfd8557e29620190eee3a34537b8f6 bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENH1350EXT.bin 7bb7e9ab117c1a560dc3259f30bf5081 bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENH1350EXT.bin Sincerely, Guan-Hong Lin(林冠宏) Software Engineer, Research and Development, Senao Networks, Inc. Tel: +886-3-3289289 ext. 2692 Fax: +886-3-3961112
binHxhT_LsEvB.bin
Description: bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=EnGenius-ENH1350EXT.bin
binhVo0nW79BI.bin
Description: bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=EnGenius-ENH1350EXT.bin
_______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
