Wen Gong <[email protected]> writes:
> From: Alagu Sankar <[email protected]>
>
> The existing implementation of initiating multiple sdio transfers for
> receive bundling is slowing down the receive speed. Combining the
> transfers using a bundle method would be ideal.
>
> The transmission utilization ratio for sdio bus for small packet is
> slow, because the space and time cost for sdio bus is same for large
> length packet and small length packet. So the speed of data for large
> length packet is higher than small length.
>
> Test result of different length of data:
> data packet(byte) cost time(us) calculated rate(Mbps)
> 256 28 73
> 512 33 124
> 1024 35 234
> 1792 45 318
> 14336 168 682
> 28672 333 688
> 57344 660 695
>
> Tested with QCA6174 SDIO with firmware
> WLAN.RMH.4.4.1-00017-QCARMSWPZ-1
>
> Signed-off-by: Alagu Sankar <[email protected]>
> Signed-off-by: Wen Gong <[email protected]>
[...]
> +static int ath10k_sdio_mbox_rx_fetch_bundle(struct ath10k *ar)
> {
> struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
> + struct ath10k_sdio_rx_data *pkt;
> + struct ath10k_htc_hdr *htc_hdr;
> int ret, i;
> + u32 pkt_offset, virt_pkt_len;
>
> + virt_pkt_len = 0;
> + for (i = 0; i < ar_sdio->n_rx_pkts; i++)
> + virt_pkt_len += ar_sdio->rx_pkts[i].alloc_len;
> +
> + if (virt_pkt_len > ATH10K_SDIO_VSG_BUF_SIZE) {
> + ath10k_err(ar, "size exceeding limit %d\n", virt_pkt_len);
> + ret = -E2BIG;
> + goto err;
> + }
This should use ath10k_warn(), fixed in the pending branch. I also
improved the log message.
--
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
